Without regular maintenance, boiler systems lose efficiency, wear down faster, and become more prone to issues.
Many homeowners face issues like:
These problems often lead to:
Our boiler maintenance services help homeowners improve efficiency, prevent breakdowns, and keep systems running reliably.
Jump HVAC provides routine service that keeps your system clean, tuned, and performing at its best.
Our technicians inspect, adjust, and optimize your system to catch issues early and extend its lifespan.
Unlike generic HVAC companies, we focus on:
What is boiler maintenance and why should it be done?
Boiler maintenance is when a mechanically certified technician performs a series of tests on your boiler to find out what parts are functioning up to the manufacturer’s specifications, and what parts are not. Each boiler maintenance includes a 25 point inspection on all components of the boiler. To see each component we test, please reference the checklist below. We offer the most comprehensive maintenance in Colorado!
The evaporator is the system component that contacts the air being recirculated by the blower in your furnace. It is the cooling coil that performs the work on the air by lowering its temperature and moisture content (humidity). As the refrigerant flows through the evaporator, heat is transferred from the air passing over the coil to the refrigerant flowing inside the coil. Evaporator tubing is enhanced with spiral scoring on the interior tube walls. If the fins on your evaporator coil are clogged, your coil cannot efficiently remove heat from the air.
Have you or someone you know ever had your evaporator coil turn into a huge block of ice? This can happen for many reasons, such as a clogged coil or neglecting to change your filter. You may notice water dripping from your evaporator coil, flooding into your furnace and surrounding area as a clue to what is going on. If this is your current situation, turn off your AC (to begin melting the ice block) and call to schedule with us today.
Boiler maintenance should be done twice a year minimum. At Jump HVAC we prefer to do a pre-season and mid-season check of the boilers. In the pre-season check, we check all the safety controls and test the combustion flue gases to see if they are close to the proper fuel to air ratio settings. In the mid-season test, we test all the safety controls and perform the combustion analysis and adjustment. This is because the boiler and burner will operate longer to allow proper setup and adjustment. To properly adjust the fuel to air ratio of a burner, the burner should operate for at least 15 minutes to allow the flame to stabilize before any adjustments are made. If this is done in the fall at the preseason test, the boiler will most likely shut off on temperature and may take several hours to complete the test.
There are many different signs you need to schedule boiler maintenance. If you experience any of the following things, please call us to schedule maintenance.
Smell: When combustion appliances are not venting or firing properly, there will be a sour smell from the flue gases in the boiler room or basement. It’s difficult to describe but will feel like it burns your nose and eyes. If you notice a natural gas smell, please call and schedule an appointment right away.
Boiler room temperatures: Extremely hot or cool boiler room temperatures can indicate a malfunction.
Water: Water on the boiler room floor may indicate a leaking pipe or boiler. This could indicate that the pressure is excessive, the relief valve is getting weak, the piping to the expansion tank is plugged, or the expansion tank is flooded.
Strange noises: Water dripping or leaking. Electrical arcing may mean a short or bare wire. Hissing like steam or gas escaping. Loud ticking may be excessive scale buildup or a low water condition in the boiler. A banging noise may indicate a boiler malfunction (especially metallic banging). Gurgling can mean air in the hydronic piping. A popcorn or rice krispies sound can be excessive scale or low water condition. Excessive vibration could indicate a pump or motor malfunction. Loud humming can mean a bound motor or pump.
Things homeowners can do on their own to help maintain their boiler.
One thing you can do to help maintain your boiler is to make sure your emitters (or radiators) are clean and not being blocked by furniture or other household items. A simple way to clean your emitters is carefully vacuum them, being sure to not bend the fins. Or you can carefully wipe them down with a cloth, but keep in mind if your boiler is running the will be warm. If the emitters are covered in particulates, they will be unable to radiate heat into your home as efficiently as they could be.
We recommend doing boiler maintenance at least once a year in the fall.
The technician does a 25 point inspection on your boiler - everything the manufacturer recommends to be tested annually in order to keep your system running to manufacturer's specifications. If a deep clean is needed to ensure proper operation, the technician will price it out while he is there.
Yes, boiler maintenance absolutely helps prevent breakdowns. Maintenance is recommended so you can catch a small repair before it spirals into a larger repair or even a full on breakdown.
Most visits take about 60–90 minutes.
Yes, a well-maintained system runs more efficiently.
Yes, new systems come with a 10 year parts warranty through the manufacturer. This warranty is only honored if you have had annual maintenance (once a year) performed on your system.
Call us or request an estimate online. Tell us what’s going on, and we’ll help you schedule the right next step quickly.
We will inspect the issue, assess your system, & walk you through the best repair or replacement options for your home, property, and budget.
Once you’re ready, we complete the repair, replacement, or service with professionalism, care, and respect for your home or property.
Just clear communication and quality HVAC service from a local team that cares.
You get experienced, licensed technicians who provide clear answers and honest guidance on the right solution for your system.
We explain what’s wrong, your options, and what makes the most sense for your home, budget, and comfort.
We focus on what’s right for you - repair when possible and recommend replacement only when it truly makes sense.
We arrive on time, communicate clearly, and deliver respectful, professional service from start to finish.
Lakewood is at the center of what we do. We help homeowners and small businesses in nearby areas with reliable heating and cooling services.
From AC issues in summer to furnace and boiler problems in winter, we understand local HVAC needs and provide clear, practical solutions.
